Removing and installing dash panel vents in the Skoda Karoq

Special tools and workshop equipment required
Release tool T10389

Removing and installing right/left side vent in the dash panel

Removing
– Hook the assembly tool -2- in order in to the openings at the sides of the vent arrows -A- and remove by pulling the vent - 1 - in direction of arrow -B-.

Installing
Caution: Do not press onto the grids of the adjustable vent when installing.
– Carefully push the vent back into the dash panel until the catches lock audibly into place.
– After installing, check the vent is functioning correctly.

Removing and installing centre vent in the dash panel
Removal and installation is the same as for the side dash panel vents

Removing and installing rear centre vent

Removing
– Use assembly tool, e.g. T10389, to unclip the vent -1- in area of -arrows A- and remove it in direction of arrow -B-.

Installing
Caution: Do not press onto the grids of the adjustable vent when installing.
Carefully push the vent back into the assembly opening until the catches lock audibly into place.
– After installing, check the vent is functioning correctly.